zkt−keyman — A DNSSEC key management tool
zkt−keyman
−C<label> [−V|--view
view] [−c file]
[−krpz] [{keyfile|dir}
...]
zkt−keyman −−create=<label>
[−V|--view view] [−c
file] [−krpz]
[{keyfile|dir} ...]
zkt−keyman
−{P|A|D|R}<keytag>
[−V|--view view] [−c
file] [−r] [{keyfile|dir}
...]
zkt−keyman −−published=<keytag>
[−V|--view view] [−c
file] [−r] [{keyfile|dir}
...]
zkt−keyman −−active=<keytag>
[−V|--view view] [−c
file] [−r] [{keyfile|dir}
...]
zkt−keyman −−depreciate=<keytag>
[−V|--view view] [−c
file] [−r] [{keyfile|dir}
...]
zkt−keyman −−rename=<keytag>
[−V|--view view] [−c
file] [−r] [{keyfile|dir}
...]
zkt−keyman −−destroy=<keytag> [−V|--view view] [−c file] [−r] [{keyfile|dir} ...]
zkt−keyman
−9 | −−ksk-rollover
zkt−keyman −1 |
−−ksk-roll-phase1 do.ma.in.
[−V|--view view] [−c
file]
zkt−keyman −2 |
−−ksk-roll-phase2 do.ma.in.
[−V|--view view] [−c
file]
zkt−keyman −3 |
−−ksk-roll-phase3 do.ma.in.
[−V|--view view] [−c
file]
zkt−keyman −0 | −−ksk-roll-stat
do.ma.in. [−V|--view view]
[−c file]
The zkt−keyman command is a wrapper around dnssec-keygen(8) to assist in dnssec zone key management.
The command is useful in dns key management. It is suitable for modification of key status.
−V view, −−view=view
Try to read the default configuration out of a file named dnssec-<view>.conf . Instead of specifying the −V or --view option every time, it is also possible to create a hard or softlink to the executable file to give it an additional name like zkt−keyman−<view> .
−c file, −−config=file
Read default values from the specified config file. Otherwise the default config file is read or build in defaults will be used.
−O optstr, −−config-option=optstr
Set any config file option via the commandline. Several config file options could be specified at the argument string but have to be delimited by semicolon (or newline).
−d, −−directory
Skip directory arguments. This will be useful in combination with wildcard arguments to prevent dnsssec-zkt to list all keys found in subdirectories. For example "zkt−keyman -d *" will print out a list of all keys only found in the current directory. Maybe it is easier to use "zkt−keyman ." instead (without -r set). The option works similar to the −d option of ls(1).
−k, −−ksk
Select key signing keys only (default depends on command mode).
−z, −−zsk
Select zone signing keys only (default depends on command mode).
−r, −−recursive
Recursive mode (default is
off).
Also settable in the dnssec.conf file (Parameter:
Recursive).
−F, −−setlifetime
Set the key lifetime of all the selected keys. Use option -k, -z, -l or the file and dir argument for key selection.
−h, −−help
Print out the online help.
−C zone, −−create=zone
Create a new zone signing key
for the given zone. Add option −k to create a
key signing key. The key algorithm and key length will be
examined from built-in default values or from the parameter
settings in the dnssec.conf file.
The keyfile will be created in the current directory if the
−p option is specified.
−R keyid, −−revoke=keyid
Revoke the key signing key with the given keyid. A revoked key has bit 8 in the flags filed set (see RFC5011). The keyid is the numeric keytag with an optionally added zone name separated by a colon.
−−rename="keyid
Rename the key files of the key with the given keyid (Look at key file names starting with an lower ’k’). The keyid is the numeric keytag with an optionally added zone name separated by a colon.
−−destroy=keyid
Deletes the key with the given keyid. The keyid is the numeric keytag with an optionally added zone name separated by a colon. Beware that this deletes both private and public keyfiles, thus the key is unrecoverable lost.
−P|A|D keyid, −−published=keyid, −−active=keyid, −−depreciated=keyid
Change the status of the given dnssec key to published (−P), active (−A) or depreciated (−D). The keyid is the numeric keytag with an optionally added zone name separated by a colon. Setting the status to "published" or "depreciate" will change the filename of the private key file to ".published" or ".depreciated" respectivly. This prevents the usage of the key as a signing key by the use of dnssec-signzone(8). The time of status change will be stored in the ’mtime’ field of the corresponding ".key" file. Key activation via option −A will restore the original timestamp and file name (".private").
−−ksk-roll-phase[123] do.ma.in.
Initiate a key signing key rollover of the specified domain. This feature is currently in experimental status and is mainly for the use in an hierachical environment. Use --ksk-rollover for a little more detailed description.
zkt-keyman −C example.net −k −r ./zonedir
Create a new key signing key for the zone "example.net". Store the key in the same directory below "zonedir" where the other "example.net" keys live.
zkt-keyman −D 123245 −r .
Depreciate the key with tag "12345" below the current directory,
zkt-keyman --view intern −C example.net
Create a new zone key for the internal zone example.net.
zkt-keyman-intern
Same as above. The binary file zkt−keyman has another link, named zkt-keyman-intern made, and zkt−keyman examines argv[0] to find a view whose zones it proceeds to process.
ZKT_CONFFILE
Specifies the name of the default global configuration files.
/var/named/dnssec.conf
Built-in default global configuration file. The name of the default global config file is settable via the environment variable ZKT_CONFFILE.
/var/named/dnssec-<view>.conf
View specific global configuration file.
./dnssec.conf
Local configuration file (only used in −C mode).
Holger Zuleger
Copyright (c) 2005 − 2008 by Holger Zuleger. Licensed under the BSD Licences. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
dnssec-keygen(8),
dnssec-signzone(8), rndc(8), named.conf(5), zkt-conf(8),
zkt-ls(8), zkt-signer(8)
RFC4641 "DNSSEC Operational Practices" by Miek
Gieben and Olaf Kolkman,
DNSSEC HOWTO Tutorial by Olaf Kolkman, RIPE NCC
(http://www.nlnetlabs.nl/dnssec_howto/)