#!/bin/sh
# $Id: libdvdcss.SlackBuild,v 1.12 2021/12/31 10:39:33 root Exp root $
# Copyright 2005-2011, 2013, 2021  Eric Hameleers, Eindhoven, The Netherlands
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:        Eric Hameleers <alien@slackware.com>
# For:       libdvdcss
# Descr:     dvd decrypting library
# URL:       http://developers.videolan.org/libdvdcss/
# Needs:     
# Changelog:
# 1.2.8-1:   01/may/2005 by Eric Hameleers <alien@sox.homeip.net>
#            * Initial build.
# 1.2.9-1:   22/nov/2005 by Eric Hameleers <alien@slackware.com>
#            * Update.
# 1.2.9-2:   20/sep/2006 by Eric Hameleers <alien@slackware.com>
#            * Omit building the Latex docs (acts strange on Slackware 11.0)
# 1.2.9-2:   30/Jun/2007 by Eric Hameleers <alien@slackware.com>
#            * New SlackBuild template.
# 1.2.9-3:   21/Jun/2008 by Eric Hameleers <alien@slackware.com>
#            * New SlackBuild template.
# 1.2.10-1:  01/feb/2009 by Eric Hameleers <alien@slackware.com>
#            * Update.
# 1.2.10-2:  02/jun/2010 by Eric Hameleers <alien@slackware.com>
#            * Rebuilt for Slackware 13.1.
# 1.2.11-1:  16/nov/2011 by Eric Hameleers <alien@slackware.com>
#            * New release.
# 1.2.13-1:  30/may/2013 by Eric Hameleers <alien@slackware.com>
#            * New release.
# 1.4.3-1:   31/dec/2021 by Eric Hameleers <alien@slackware.com>
#            * Update.
# 
# Run 'sh libdvdcss.SlackBuild' to build a Slackware package.
# The package (.txz) plus descriptive .txt file are created in /tmp .
# Install using 'installpkg'. 
#
# -----------------------------------------------------------------------------

PRGNAM=libdvdcss
VERSION=${VERSION:-1.4.3}
NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
BUILD=${BUILD:-1}
TAG=${TAG:-alien}

DOCS="AUTHORS COPYING ChangeLog INSTALL NEWS README doc/html"

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.bz2"
SRCURL="http://download.videolan.org/pub/${PRGNAM}/${VERSION}/${PRGNAM}-${VERSION}.tar.bz2"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
  case "$(uname -m)" in
    i?86) ARCH=i586 ;;
    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
    *) ARCH=$(uname -m) ;;
  esac
  export ARCH
fi

# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
case "$ARCH" in
  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
             ;;
esac

case "$ARCH" in
    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
    *)       TARGET=$ARCH-slackware-linux ;;
esac


# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line $LINENO!" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Save old umask and set to 0022:
_UMASK_=$(umask)
umask 0022

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
rm -rf $OUTPUT/{configure,make,install,error,makepkg}-$PRGNAM.log
                          # remove old log files

# Source file availability:
if ! [ -f ${SOURCE} ]; then
  echo "Source '$(basename ${SOURCE})' not available yet..."
  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
  if ! [ "x${SRCURL}" == "x" ]; then
    echo "Will download file to $(dirname $SOURCE)"
    wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
      mv -f "${SOURCE}" "${SOURCE}".FAIL
      exit 1
    fi
  else
    echo "File '$(basename ${SOURCE})' not available... aborting the build."
    exit 1
  fi
fi

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM

echo "Extracting the source archive(s) for $PRGNAM..."
tar -xvf ${SOURCE}
cd ${PRGNAM}-${VERSION}
chown -R root:root .
chmod -R u+w,go+r-w,a+rX-st .

echo Building ...
LDFLAGS="$SLKLDFLAGS" \
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --localstatedir=/var \
  --sysconfdir=/etc \
  --disable-doc \
  --program-prefix= \
  --program-suffix= \
  --build=$TARGET \
  2>&1 | tee $OUTPUT/configure-${PRGNAM}.log

make $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
make apidoc 2>&1 | tee -a $OUTPUT/make-${PRGNAM}.log
make DESTDIR=$PKG install 2>&1 | tee $OUTPUT/install-${PRGNAM}.log

# Don't forget the testtools:
make test/csstest test/dvd_region 2>&1 | tee -a $OUTPUT/make-${PRGNAM}.log
install -D -m0755 test/csstest test/dvd_region -t $PKG/usr/bin/

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Remove the redundant and wrongly placed stuff:
rm -rf $PKG/usr/share/doc
rmdir $PKG/usr/share 2>/dev/null

# Don't ship .la files:
rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" \
  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt

# Restore the original umask:
umask ${_UMASK_}